| Bluetooth I2C Bus Adapter |
The connectBlue Bluetooth based I2C (Inter-Integrated Circuit) OEM adapter enables a cost-efficient and easy-to-use wireless solution when connecting devices such as displays, sensors and signal converters. The new adapter implements the master side of the I2C bus interface and via Bluetooth functionality makes it possible to wirelessly enable a number of slaves on an I2C bus. The “original” I2C master implements a simple I2C look-alike protocol based on the Bluetooth serial port profile (SPP). The master device can then access all I2C slaves available on the I2C bus over Bluetooth wireless technology. With a few additions, the Bluetooth I2C Bus Adapter is configured using the same AT commands as the connectBlue standard Serial Port Adapters. Typically, the adapter is pre-configured using a toolbox or AT commands, and then mounted and used for reading and writing data to and from the slaves on the I2C bus. It is also possible to use the Bluetooth I2C Bus Adapter more dynamically and/or to re-configure it over air.
Status: Dieses Produkt ist bereits obsolete. Sie können jedoch gerne nach Alternativen bei uns anfragen. English: this product is officially obsoleted. Please fill free to contact us for alternatives. |
